How do I connect my External SSD?

Step 1:

USB Connection:

  • Connect the mini-USB connector on the cable to the back of the drive.
  • Connect the other end of the USB cable to the computer's USB A-Type port
  • Follow Step 2:

eSATA Connection:

  • Connect the eSATA connector on the cable to the back of the drive.
  • Connect the other end of the eSATA cable to the computer's eSATA port
  • Follow Step 2:

FireWire Connection:

  • Connect the FireWire connector on the cable to the back of the drive.
  • Connect the other end of the FireWire cable to the computer's FireWire port. This may be marked as the 1394 port.
  • Follow Step 2: 
Step 2:
  • Check the drive status light. If the status light is dim or blinking for several minutes, connect the USB supplemental power connector to another USB port on the computer.
  • NOTE: Only use the power cable supplied with the Integral External SSD. Do NOT use a mains power supply.
  • The drive icon will appear in My Computer, Windows Explorer, or A Mac Desktop.
  • Your Integral External SSD is ready to use. Save or drag & drop files to the drive as you would to any other drive attached to your computer.